Ubiquiti Networks airMAX NanoStation M5

Ubiquiti Networks airMAX NanoStation M5 Overview

Designed for outdoor and indoor settings, Ubiquiti airMAX NanoStation M5 helps network administrators bridge networks across distances to provide shared internet connectivity for the users. 

Key Features:

• 5 GHz frequency 

• Two 10/100 MbE RJ45 ports 

• 14.6-16.1 dBi Antenna gain 

• 43° (H-pol) / 41° (V-pol) / 15° (Elevation) beamwidth 

• Compact design 

• TDMA airMAX protocol

• Pole mounting 

Here is a detailed description of the highlighted features of Ubiquiti NanoStation M5.

Dual Ethernet Ports:

This Ubiquiti NanoStation of Ubiquiti is equipped with two 10/100 MbE RJ45 ports, allowing you to have high-speed wired connectivity. These ports come with software-enabled PoE support, helping you to power external devices such as IP security cameras, VoIP phones, and the like.

Long-Distance Point to Multipoint Connection:

NanoStation M5 is a high-performing multi-point networking device, that helps network administrators to establish wireless bridges between points which are up to 15 km apart. You can maintain a real outdoor data transfer rate of 150MBps between the two radios linked by the Ubiquiti airMAX wireless bridge. 

This makes it the best solution for establishing a wireless network for rural areas, remote locations, WISP, for surveillance, point-to-point, and a wireless network for point-to-multipoint.

Noise-Free Wireless Bridge:

Ubiquiti NanoStation M5 supports 5GHz frequency, enabling this device to operate in single beamwidth that can filter out noise in areas that are crowded with signals having similar frequencies.

Easy Installation: 

This 5Hz NanoStation wireless bridge supports pole-mounting, you can use it as either a remote base station or ISP-connected access point. This comes with an intuitive interface, helping even non-technical persons to install them using only a single wrench.

TDMA airMAX® Protocol:

It is provided with time division multiple access (TDMA) airMAX® protocol, allowing users to send and receive data via a predestined time slot which is programmed by an intelligence access point. This protocol ensures low latency, high throughput, and scalability.

Polarization:

The airMAX wireless bridge supports 43° (H-pol) / 41° (V-pol) / 15° (Elevation) beamwidth. The narrow 150-elevation beamwidth ensures better signal strength in a particular direction. On the other hand, the slightly broader horizontal and vertical polarization leads to effective and broader coverage in outdoor settings.