Ubiquiti Networks Elevator Starter Kit

|
Ubiquiti Networks Elevator Starter Kit Overview:
Designed to secure elevator floor selection in multi-floor buildings, the UniFi Access Elevator Starter Kit comes with an Elevator Hub, a G2 Reader, two 2-wire PoE extenders, and 10 Access Cards. It allows you to connect to in-elevator readers with PoE to authorize floor selection and supports up to 18 floors with digital inputs for elevator car status and emergency.
Key Features of UniFi Access Hub Elevator:
-
UniFi Elevator Hub supports four digital inputs for emergency, car position (5-bit), car status (Up/Down/Stop/Full), and door status (Open/Close). It also supports relays for controlling up to 18 floors.
-
Ubiquiti elevator control can be powered through PoE++, and it also features 4 PoE outputs, 50V DC with a total of 42W, making it PoE PoE-powered elevator access.
-
The enclosure material of UniFi Hub Elevator is made of Polycarbonate, enabling it to work within a -10 to 40° C (14 to 104° F) ambient temperature range. In addition, it has Air: ±8kV, contact: ±4kV ESD/EMP Protection.
-
It is suitable for commercial building elevator security, residential building elevator access, secure building entry elevator, remote elevator control, and audit trail elevator access.
Key Features of Wire PoE Extenders:
-
G2 Reader elevator comes with PoE input: (1) PoE++, 50V DC, Max. 1.2A and PoE output: (1) PoE+, 48V DC, 0.72A PoE interface. You can thus provide both power and data through one Cat cable.
-
It supports one 10/100 Mbps Ethernet and one HomePlug AV network interface, making it suitable for a scalable elevator for physical security, smart building, and facility management elevator solution.
Salient Features of G2 Readers:
-
G2 Reader elevator supports NFC Card & Keyfob Access, Mobile Unlock, Handwave Request to Exit, NDAA Compliant, and IP55 weatherproof design.
-
G2 Reader access control is UL 294 Level certified, providing Level 1 safety for destructive attacks, line security, endurance, and standby power.
-
It comes with BLE 4.1 and NFC connectivity for easy management and configuration.
-
Additional features are a proximity sensor, 0.7W speaker, R/G/B/W LEDs, and < 30 mm (1.18'') NFC read range.
Length | 1.34 in |
Width | 3.82 in |
Height | 4.37 in |
Weight | 9.48 lbs |