Ubiquiti Networks UniFi U-LTE-US Redundant WAN

|
Ubiquiti Networks U-LTE-US Overview
Stay connected and avoid downtime with the UniFi U-LTE Redundant WAN over LTE. This LTE Category 4 device is equipped with a 2x2 MIMO external antenna and automatically switches to AT&T’s LTE network if your primary internet goes offline. Setup is simple—just connect it to a UniFi Dream Machine or UniFi Security Gateway (sold separately) and manage everything through the UniFi Network Controller.
The U-LTE is powered via a PoE-enabled Gigabit Ethernet port and includes a secondary port for passive PoE bridging and forwarding. A built-in 1.54-inch display makes it easy to check signal strength, connection status, and data usage at a glance. Flexible coverage plans are available to keep your network running smoothly without interruption.
Key Features
• Provides Backup Internet Connectivity
• Uses AT&T LTE Network
• 2 x Gigabit Ethernet Ports
• PoE-Compliant
• Category 4 LTE Radio
• 1.54" Status Display
• External LTE Antenna
• Plug-and-Play Installation
• Works Outdoors
• Compatible with UniFi Network Controller
LTE Internet Backup
The UniFi U-LTE connects to the AT&T LTE network to provide reliable backup internet, with a variety of data plans available to suit your needs. Actual coverage, speed, and availability will depend on AT&T’s LTE service in your area. For locations with weaker signals, you can also connect an optional high-gain antenna to boost performance.
Flexible Mounting Options
The UniFi U-LTE can be installed either indoors or outdoors to achieve the best signal strength. It comes with a stand and a flexible mounting bracket, making placement and setup simple.
UniFi Controller
Network Management
With the UniFi Network Controller, you can set up and manage UniFi devices, map out your network, control traffic flow, and track performance statistics—all from a single, easy-to-use interface.
Multi-Site Management
A single UniFi Controller instance running in the cloud lets you manage multiple UniFi sites from one central interface. Each site stays completely independent, with its own monitoring, configuration settings, maps, statistics, and admin accounts.
Switch Configuration
With the UniFi Controller, you can easily access and configure any managed UniFi Switch. Key features include:
· Set operation mode per port (switching, mirroring, or aggregate)
· Configure network and VLAN settings
· Enable jumbo frame and flow control service
· Adjust network settings as needed
· Apply storm control on a per-port basis
· Manage spanning tree configuration
· Use 802.1X control and RADIUS VLAN for secure access
· Access a debug terminal with command-line interface support
Switch Port Status
You can check detailed status information for each port, including:
• Connection speed and duplex mode
• Transmit and receive (TX/RX) data rates
• Current network and VLAN configuration
Length | 3.94 in |
Width | 1.69 in |
Height | 1.14 in |
Weight | 3.09 lbs |