Ubiquiti Networks UISP Fiber XGS Optical Network Unit (UISP-FIBER-XGS)

Ubiquiti Networks UISP Fiber XGS Optical Network Unit (UISP-FIBER-XGS)

UISP Fiber XGS Optical Network Unit from Ubiquiti Networks is an optical network unit that can deliver 10 Gbps uplink/downlink speeds over distances up to 20 km.

Key Features of UISP-FIBER-XGS:

• XGS-PON CPE 

• 256 MB DDR memory 

• 20km physical reach 

• Downstream and upstream non-blocking line rate up to 9.95 Gbit/s

• TX at 1270nm and RX at 1577nm wavelength 

• 10GbE RJ45 LAN port

Here is a detailed description of the Ubiquiti XGS-PON ONU.

High-Speed Fiber Access:

UISP-FIBER-XGS USA comes with downstream and upstream non-blocking line rates up to 9.95 Gbit/s for a distance of up to 20km (12.43 Miles), allowing you to establish a high-speed and long-distance fiber-based network. 

The support for 10 Gigabit fiber clients makes this a suitable fiber optics solution for ultra-fast broadband access, last-mile fiber connectivity, network subscriber unit fiber, enterprise fiber solutions, ISP fiber equipment, telecommunications fiber, fiber network expansion, high-speed internet access, optical networking, broadband infrastructure, digital communication, and network performance fiber.

Network Interface:

This Ubiquiti optical network terminal is equipped with one SC/APC, ITU-G.9807 XGSPON WAN port and one 100/1,000/2,500/5,000/10,000 Mbps RJ45 LAN ports, allowing you to connect various devices as per your networking needs. 

Memory and Storage:

This is a fiber to the home (FTTH) ONU as well as a fiber to the business (FTTB) ONU featuring 256 MB DDR memory and 32 MB NOR onboard flash storage, allowing you to deploy this Ubiquiti optical fiber unit for high bandwidth applications. 

Management:

Ubiquiti UISP-FIBER-XGS supports management through Ethernet in-band and the UISP software application with version 1.5.7 and later. Furthermore, the PON status can be indicated by three signal LEDs whose configuration is as below: 

• All-OFF: bootup

• 1x orange: signal too low (< -27 dBm)

• 1x white: signal low (>= -27 dBm)

• 2x white: signal good (>= -24 dBm)

• 3x white: signal strong (>= -12 dBm)

• 1x orange + 2x white: signal too strong (>= -9 dbm)

• 3x orange: no signal

You can thus easily perform fiber optics diagnostics and come up with quick troubleshooting solutions.