Ubiquiti Networks NBE-5AC-GEN2 NanoBeam ac Gen2 airMAX ac CPE with Dedicated Management Radio

Ubiquiti Networks NBE-5AC-GEN2 NanoBeam Gen2 airMAX Overview:

Designed for long-distance point-to-point and point-to-multi-point applications, Ubiquiti NBE-5AC-GEN2 is a compact, UISP-ready, 5 GHz WiFi bridge with enhanced surge protection and an optimized radio and antenna.

Key Features:

• 5 GHz station

• 450+ Mbps data throughput

• 10k+ link range

• Dedicated WiFi management

• GbE PoE out RJ45 port

• Pole & wall mounting

• 200 km/h (125 mph) Wind survivability

Here is an in-depth description of Ubiquiti NBE-5AC-GEN2 features.

High Throughput and Performance:

This is a high-performing NanoStation that can support 450+ Mbps data throughput and can help you bridge networks situated 10km+ apart. This high throughput makes this wireless network bridge suitable for various applications such as wireless networks for rural areas, remote locations, WISP, surveillance, point-to-point, and point-to-multipoint.

TDMA airMAX® Protocol:

It is provided with time division multiple access (TDMA) airMAX® protocol, allowing users to send and receive data via a predestined time slot which is programmed by an intelligence access point. This protocol ensures low latency, high throughput, scalability, and noise immunity. 

Intelligent QoS enables the device to accord priority to voice/video to deliver seamless streaming. TDMA airMAX technology also supports high data throughput that warrants dense 256QAM modulation. You can thus enjoy up to 3x data throughput than standard airMAX products.

Noise-Free Wireless Bridge:

NanoBeam AC Gen2 supports 5GHz frequency, enabling this device to operate in single beamwidth that can filter out noise in areas that are crowded with signals having similar frequencies.

Outdoor Point-to-Multi-Point Connection:

airMAX ac CPE of Ubiquiti is provided with UV-stabilized plastic enclosure material and it supports both pole- and wall-mounting. This NanoStation can withstand up to 200 km/h (125 mph) speed and features 45.4 N at 200 km/h (10.2 lbf at 125 mph) wind loading. It also comes with air/contact: ± 24kV ESD/EMP protection. These features make Ubiquiti NanoBeam operate under harsh outdoor conditions with a -40 to 80° C (-40 to 176 F) temperature range and a 5 to 95% range of ambient operating humidity.

High Gain Antenna:

NBE-5AC-GEN2 is equipped with a high-gain antenna with 19 dBi antenna gain and dual-linear polarization, enabling this NanoStation to deliver robust and focused signals to establish high-speed point-to-point and point-to-multipoint connectivity.